Removing Mazda 2 Sport Stereo?

[Graham]

Can anyone provide an insight on how to remove the factory stereo please?

So far, I think this is about the order of bits to do...

1.  Look towards the side of the stereo from inside the glove box and remove silver 10mm bolt
2.  Remove the gear gator surround (held on with metal clips)
3.  Remove lower dash (beneath gearstick) by first removing the side panels and then the whole lower dash, revealing the lower screws holding the stereo in place

That's where i get stuck.  Are there any more screws holding the stereo in place?  (behind hazard warning moulding?) Or is everything then held in place with clips?

I'm grateful for any assistance anyone can provide.

Thanks in anticipation, Graham.

[Cal locke]

under the hazard lights there is another two bolts then just pulls off