I have a TS and have put speakers in the rear.
You have to remove the whole panel.
You need to take the window handle off (there is a spring clip holding it on)
There's a cover you must remove behind the door handle and a screw.
Another screw in the door handle bit where you put your hand to pull the door closed.
And another screw/clip behind a plastic cover in the bottom corner of the window.
Once these are all removed you can PULL the panel off (it will still be held in place with clips) But these pull out just fine.
You then have to unscrew the speaker hole covers.
Find the correct wires for the speaker in the door wiring (orange I think mine were)
Wire them up.
Screw the speakers into the plastic of the door. (there are no pre-drilled holes)
Push the door panel back on (aligning clips), Put screws back in, window handle, covers. ONE DOOR DONE!
