Mazda 2 Forums UK

Technical Section => Engine/Transmission/Powertrain/Exhaust => Topic started by: Aft207 on January 05, 2018, 01:53:27 AM

Title: mazda 2 exhaust
Post by: Aft207 on January 05, 2018, 01:53:27 AM
I am looking at getting an aftermarket exhaust for my 2 I have struggled to find an axleback bolt-on exhaust and was wondering as the ford fiesta and M2 have similar chassis and underpinnings would a fiesta exhaust fit the 2. Or does anyone have any suggestions for axleback exhausts cheap enough to get delivered to the uk
Title: Re: mazda 2 exhaust
Post by: Soot Sprite on January 05, 2018, 07:29:03 AM
If the chassis is that similar then I would have thought that most of the system would be compatible but hanger points etc might be quite different? A quick google doesn't help either!

Have you considered a custom build?

Title: Re: mazda 2 exhaust
Post by: Aft207 on January 05, 2018, 08:23:37 PM
Have had look at custom ones but it I would prefer a bolt on so I can change it back to stock easily
Title: Re: mazda 2 exhaust
Post by: cosh68 on January 06, 2018, 06:47:31 PM
Aft207...

http://www.racingbeateurope.com/b-mazda-2-racing-beat-power-pulse-exhaust-2011-15-b-1877-p.asp (http://www.racingbeateurope.com/b-mazda-2-racing-beat-power-pulse-exhaust-2011-15-b-1877-p.asp)

https://www.magnaflow.com/products?partnumber=15555#modal-compatiblevehicles (https://www.magnaflow.com/products?partnumber=15555#modal-compatiblevehicles)

Or get one made up, got this ready to fit to my wifes Tamura.....

(https://image.ibb.co/d1UxbG/IMAG2050.jpg)

I've got a 2" stainless cat-back with a twin outlet with 3" slash cut tips...

Shaun....
Title: Re: mazda 2 exhaust
Post by: Aft207 on February 02, 2018, 06:30:37 PM
Had a look at the magnaflow one I quite like the look of it it?s just trying to get one shipped here without too much extra cost